BOHUASend your drawing

Engineering guide

NDA-First Aluminum Casting RFQ: What Buyers Can Share Before Sending Drawings

If you need an NDA before sharing drawings, tell Linda in the first message. Add only project context that your organization has authorized you to disclose. Do not send drawings until Bohua confirms the next step.

On this page
  1. Start the NDA discussion without attaching drawings
  2. What to discuss before sending a drawing
  3. Check public manufacturing facts first
  4. Agree the handoff before releasing files

Start the NDA discussion without attaching drawings

If you need an NDA before sharing drawings, tell Linda in your first message. Your first message can contain only your contact details and that request. This page does not confirm that an NDA will be signed.

Contact Linda, Export Sales, at linda@ningbobohua.com. If you need an NDA before sharing drawings, say so in that message. Do not send drawings until Bohua confirms the next step.

Project context is not automatically non-confidential. Share a part family, dimensions, material, volume, or launch information only if your organization permits disclosure. If it does not, keep the first exchange limited to arranging the NDA.

What to discuss before sending a drawing

Use authorized general context to screen manufacturing fit. After signing and release approval, send the drawing package so we can review the final tooling and production scope.

Optional context for an initial capability discussion
Context, if cleared for disclosureWhat it helps screenWhat remains drawing-dependent
Part family and general functionRelevant manufacturing processesGeometry, internal passages, and tooling layout
Approximate size and weight rangeEquipment and handling fitWall sections, local features, and exact process route
Material and heat-treatment targetMaterial and processing capabilitySpecified properties and acceptance requirements
Sample need and annual demand rangeProgram stage and purchasing patternTooling, release quantities, and production schedule
Machining and inspection categoriesRequired operations and available equipmentDatums, tolerances, inspection coverage, and report scope
New tool or existing-tool programWhether a tooling review is neededTool condition, compatibility, and modification needs

Keep full drawings, CAD files, confidential assembly details, precise tolerance stacks, and unreleased program information for the authorized handoff. A cropped image or simplified model may still reveal protected design information; do not assume it is cleared for disclosure.

A first message can be brief: “We are evaluating an aluminum casting project. We require an NDA before sharing drawings. Please let us know the next step for arranging the agreement.” Add project details only when their release is permitted.

Check public manufacturing facts first

You can compare published equipment and process information with your needs before releasing confidential geometry.

At Bohua

Bohua has its own factory and export team in Ningbo, Zhejiang, China. Casting experience dates from 1994. Equipment includes 32 tilt-pour machines and 10 upright gravity casting machines. A356 and ZL114 are used for gravity and tilt-pour casting.

T5/T6 heat treatment is performed in-house. Inspection equipment includes CMM and X-ray systems. After signing and release approval, send your design and inspection requirements so we can review feasibility and agree which checks the quotation includes.

Overhead view of a foundry hall with round holding furnaces, casting machines and green fume ducts along a central aisle
Gravity casting hall with holding furnaces and fume extraction

Review the Bohua supplier capability sheet and gravity casting manufacturing scope. For inspection equipment, see Bohua's quality control capabilities.

Bridge-type coordinate measuring machine on a granite table with a joystick controller in a bright inspection room
Coordinate measuring machine for dimensional inspection

At Bohua

Before sharing drawings, you can review Bohua’s NQA-issued IATF 16949:2016 certification, valid through November 20, 2027.

Bohua supports PPAP submissions up to Level 5.

For machining feasibility screening, Bohua can reach ±0.02 mm on key machined dimensions.

Use an authorized tolerance band and approval requirement for the initial discussion; release the detailed geometry through the agreed confidential handoff.

Agree the handoff before releasing files

Separate the signed agreement from the practical permission to send a specific file package.

  1. Arrange the NDA. Identify the parties and the people responsible for the agreement. Confirm that both parties have signed before releasing the drawing package.
  2. Clarify handling expectations. Ask who may access the files, the permitted use, any onward-sharing conditions, and the retention or deletion arrangements. Obtain agreement on the terms that matter to your organization before sending files.
  3. Authorize release. Confirm the agreement is signed and the package is cleared for disclosure. Agree the recipient and transfer method.
  4. Send a controlled package. Identify the current drawing and model revision. Keep a list of the files sent. Mark superseded versions when a revision changes.

After signing and release approval, the technical package should identify the alloy and condition, machining scope, critical features, required inspection evidence, quantities, and delivery requirements. Use the complete aluminum casting RFQ checklist for the detailed list.

For a confidential coolant connection project, use the coolant water outlet manufacturing and RFQ requirements to prepare application details after release is authorized.

Use the initial discussion to identify what needs review. After the authorized technical handoff, agree the process route, order quantity, tooling scope, delivery date and acceptance requirements for your project.

Discuss an NDA before sending drawings

Contact Linda with your contact details and NDA request; keep confidential drawings for the agreed handoff.

Contact Linda →

Linda

Export Sales

linda@ningbobohua.com

Ningbo, Zhejiang, China